Panasonic AJ-HD1400E Operating Instructions Manual page 50

Setup menus
(continued)
VIDEO (continued)
No./Item Description of setting
1 This sets the line on which the UMID information is to
692*
be superimposed.
UMID POS
0000 BLANK
0001 12L
: :
0006 17L
: :
0008 19L
<Notes>
The line selected for the menu item No. 501 VITC
POS-1 and No. 502 VITC POS-2 settings cannot
be selected for this item.
The default settings are not restored even if the
RESET button is pressed while holding down the
SEARCH button.
Metadata recorded on the tape will be output giving
UMID information first priority. When metadata is
output, set to a line other than the original
multiplexed line or select "BLANK."
693 This selects gamma correction.
0000 OFF :
GAMMA SEL
Gamma correction is not carried out.
0001 GAMMA1 :
This corrects video images shot with the cine
gamma FilmREC mode of the Varicam to images
of film quality (equivalent to Telecine 5 of HD
Gamma Corrector in AJ-GBX27G).
0002 GAMMA2 :
This corrects video images shot with the cine
gamma FilmREC mode of the Varicam to images
of film quality (equivalent to Telecine 6 of HD
Gamma Corrector in AJ-GBX27G).
0003 GAMMA3 :
This converts video images shot with the cine
gamma FilmREC mode of the Varicam into the
Cineon curve appropriate for film recording.
1023
768
512
256
256
<Notes>
Gamma correction is effective in the following conditions.
When the VTR operation mode is VV (TAPE) and
720p is displayed in the system format.
However, during cross convert from 720p > 1080i,
gamma correction is not effective for SD output.
When "ON" is selected, the GAMMA lamp on the
front panel is on at all times.
When this unit is turned to OFF, this setting returns
to "OFF." The setting of user default returns to "OFF."
This item is not effective for 1394 output.
50
TELECINE5
TELECINE6
Cineon
512 768 1023
No./Item Description of setting
1 For selecting the blanking ON/OFF for a period of
695*
vertical blanking on video signals of the SD output.
BLANK
0000 BLANK :
DW
LINE*
All the lines are forcibly blanked.
0001 THRU :
None of the lines are blanked.
0002 MANU :
Blanking ON or OFF is selected on a line-byline
basis.
<Notes>
When setting "MANU," if the STOP button is
pressed, the screen shifts to the sub screen and
the ON/OFF setting for each line can be adjusted.
Press the STOP button again to return to the main
screen.
Lines that are selected as being blanked in this
menu item are similarly blanked before being up-
converted when replaying the SD tape.
Sub screen (59/60 Hz mode)
00 0000 BLANK :
Forced blanking
LINE 10&273
0001 THRU :
:
No blanking
12
LINE 22&285
Sub screen (50 Hz mode)
00 0000 BLANK :
Forced blanking
LINE
0001 THRU :
7&320
No blanking
:
15
LINE 22&335
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
*DW: With SD output (SD tape playback or down-converted
output)
"_____" indicates the factory setting.