Superimpose Screen - Panasonic AJ-HD1400E Operating Instructions Manual

Superimpose screen

The control signals, time code, etc. are displayed using
abbreviations.
TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
Abbreviations:
CTL : Control signal count value
TCR : Time code data recorded in the SBC area
TCR.: Time code data recorded in the VAUX area
UBR : User bit data recorded in the SBC area
UBR.: User bit data recorded in the VAUX area
TCG : Time code data of the time code generator
UBG : User bit data of the time code generator
<Notes>
[T ¢ R], [T ¢ R.], [U ¢ R] or [U ¢ R.] is displayed when the
data has not been read correctly from the tape.
When the 23.98/24 Hz, 25 Hz (HD/SD), or 50Hz (HD/SD)
mode is selected in menu No. 25 SYSTEM FREQ,
indications on the CTL and TCR will be "--:--:--:--".
Characters displayed
The background of characters superimposed on the display
can be changed using menu No. 009 CHARA TYPE.
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
Display position
The position of the characters superimposed on the display
can be changed using menus No. 007 CHARA H-POS and
No. 008 CHARA V-POS.
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
Operation mode
The VTR's operation mode can also be displayed using
menu No. 006 DISPLAY SEL.
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
STOP
TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
TCR ¢¢ : ¢¢ : ¢¢ : ¢¢
TV monitor
VTR operation mode
57