Video - Panasonic AJ-HD1400E Operating Instructions Manual

Setup menus
(continued)

VIDEO

No./Item Description of setting
1 For selecting the type of internal standard signals.
601*
0000 100%CB :
VIDEO INT
A 100% color bar signal is selected.
SG
0001 75%CB :
A 75% color bar signal is selected.
0002 SMPTE :
An SMPTE color bar signal is selected.
0003 ARIB :
An ARIB color bar signal is selected.
0004 BLACK :
A black signal is selected.
1 For selecting how to process the serial input.
602*
0000 DR_OFF :
SDI IN MODE
The 8 higher bits whose two lower bits have been
rounded off are recorded.
0001 DR_ON :
The dynamically rounded 8 higher bit signal is
recorded.
603 For setting whether to mute the video output signal
when a blank part of the tape is detected during
V-MUTE SEL
playback.
0000 N-MUTE :
The video output signal is not muted. (It is frozen.)
0001 GRAY :
The video output signal is muted and turned gray.
0002 BLACK :
The video output signal is muted and turned black.
0003 NOISE :
The video output signal is muted and turned into
noise.
604 For selecting the freeze mode of the still pictures and
the slow play mode.
FREEZE SEL
0000 FIELD :
Field freeze, field slow
0001 FRAME :
Frame freeze, frame slow
<Note>
For IEEE 1394 digital output, if format conversion is
not executed, the frames may freeze or slow down
regardless of the settings in this item.
1 For selecting what signals are to be output from the
615*
VIDEO OUT1 output connector.
V OUT SEL
0000 CMPNT :
The HD component signals are output.
0001 CMPST :
Composite signals are output.
<Note>
When the CMPST is selected, the Pb and Pr of the
analog HD component signals are muted.
This is used to select the method to process the
1
619*
images using the vertical filter during down-
V_FILTER
conversion.
0000 FIELD :
The images are processed by field basis.
0001 FRAME :
The images are processed by frame basis.
<Note>
When "FRAME" has been selected, the resolution is
improved, but the images may flicker.
1 For setting the image processing during down-
620*
conversion.
DOWNCON
0000 FIT_V :
MODE
Side cut mode
0001 FIT_H :
Letter-box mode
0002 FIT_HV :
Squeeze mode
No./Item Description of setting
1 For setting the image processing during up-
621*
conversion.
UPCONV
0000 FIT_V :
MODE
Side panel mode
0001 FIT_H :
Top and bottom cut-off in vertical direction
0002 FIT_HV :
Stretch mode
1 For enhancing the horizontal outlines during down-
626*
conversion.
D/C ENH H
0000 0dB
0001 +1dB
For enhancing the vertical outlines during down-
1
627*
conversion.
D/C ENH V
0000 0dB
0001 +1dB
1 For enhancing the horizontal outlines during up-
628*
conversion.
U/C ENH H
0000 0dB
0001 +1dB
1 For enhancing the vertical outlines during up-
629*
conversion.
U/C ENH V
0000 0dB
0001 +1dB
1 For selecting the HD output signal format during
630*
1080i tape playback or in the 1080i EE mode.
1080i >
0000 1080i
HD_OUT
0001 720p
<Note>
This item's setting cannot be changed while a tape is
being recorded or while the recording pause mode is
established.
1 For selecting the HD output signal format during 720p
632*
tape playback or in the 720p EE mode.
720p>
0000 1080i
HD_OUT
0001 720p
<Note>
This item's setting cannot be changed while a tape is
being recorded or while the recording pause mode is
established.
For selecting the HD output signal format during SD
1
636*
tape (DVCPRO50, DVCPRO, DV or DVCAM)
SD >
playback.
HD_OUT
0000 1080i
0001 720p
650 0000 CMPNT :
Level adjustment mode for the component style
STYLE
0001 CMPST :
Level adjustment mode for the composite style
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
"Menus which are displayed" (page 32).
"_____" indicates the factory setting.
47