Umid Information Display - Panasonic AJ-HD1400E Operating Instructions Manual

Error messages
If "T&S&M" is selected in the menu No. 008 DISPLAY SEL, a message appears in the modedisplay whenever a warning or
error occurs. When multiple events occur, the event with the highest priority is displayed.
Priority Display
Error messages
(See error message table)
High
INT SG
NO INPUT
Warning messages
Low
(See error message table)

UMID information display

This is displayed when UMID information is present on the input signal in EE mode.
This lamp lights during tape playback when UMID information has been recorded on the tape. "NO-INFO" is displayed when
there is no UMID information.
Display
MATNO
COPY
OWNR
POS
DATE
TIME
60
(continued)
When an operational malfunction has occurred in the unit, the error number flashes and the
error message is indicated on the counter display.
When SG has been selected as the input signal by the INPUT SELECT button, the "INT SG"
display will appear for the first two seconds at the start of operation (EE mode) when the REC
button is pressed.
If there are no input signals--with the exception of the analog audio signals-- supplied to the
connectors selected by the INPUT SELECT button, the "NO INPUT" display will appear for the
first two seconds at the start of operation (EE mode) when the REC button is pressed.
When a warning occurs in this unit, the error number and warning message are indicated on the
counter display. When multiple warnings occur, the warning with the highest priority is
displayed.
Material number
Instance number (No. of copies)
Country, organization, user
Reception status from GPS satellites when recording spatial coordinates
(height above sea level, longitude and latitude):
HOLD: No reception from any satellite
2D: Reception possible, but number of satellites is insufficient. Height
above sea level will not be accurate.
3D: Good reception
Date
UTC (Coordinated Universal Time) and time difference with UTC
Description
Description