Motorola MG7550 User Manual page 13

Front Panel Lights
During Power up, the lights will blink for about a minute.
LIGHT
Power
Upstream
Downstream
Online
1 2
3 4
Ethernet
LAN ports
2.4 GHz
WLAN
5 GHz
WLAN
WPS
†
If a blue light blinks continuously, this indicates partial service (at least one designated channel has not
completed bonding). You should still get high Internet speeds, but your service provider may want to know
so they can adjust their network.
COLOR DESCRIPTION
ON:
Green
OFF:
Green Blinking: Ranging in progress
Green ON:
Green or
Blue Blinking: Negotiating bonded channel(s)
Blue
Blue ON:
O FF:
Green Blinking: Scanning for DS channel
Green or
Green ON:
Blue
Blue Blinking: Negotiating bonded channel(s)
Blue ON:
Blinking:
Green
ON:
O FF:
Blinking:
Green:
Green or
Amber:
Amber
O FF:
Blinking:
Green ON:
O FF:
Blinking:
ON:
Green
O FF:
Blinking:
Green
ON:
MG7550 power on
MG7550 power off
Connected on 1 channel
Bonded with 2 or more channels
Upstream not connected
Connected on 1 downstream channel
Bonded with 2 or more channels
Trying to go online
Online
Offline
Ethernet data is flowing
Connected at highest LAN speed, 1 Gbps
Connected at 10 or 100 Mbps
No connection
Data is flowing
2.4 GHz Wi-Fi is enabled
2.4 GHz Wi-Fi is not enabled
Data is flowing
5 GHz Wi-Fi is enabled
5 GHz Wi-Fi is not enabled
WPS is in discovery mode
Light will remain solid after
WPS configuration is successful
†
†