Mounting The Kombitool; Assembling The Unit - Stihl FH-KM Instruction Manual

Mounting the KombiTool

2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
FH-KM

Assembling the Unit

Removing the Potective Cap
If a cap is fitted on the end of the
KombiTool's or basic power tool's drive
tube:
Pull the protective cap off the end of
N
the drive tube and keep it in a safe
place.
If the plug comes out of the drive tube
when you pull off the cap:
Push the plug into the drive tube as
N
far as stop.
Mounting the Gearbox
11
10
10
5
Loosen the clamp screws (10).
N
Push the gearbox (11) onto the
N
drive tube (5), turn the gearbox (11)
back and forth as necessary.
English
7