Assembling The Unit; Mounting The Kombitool - Stihl FCB-KM Instruction Manual

6 Assembling the Unit

WARNING
Refer to the user manual of the power tool for
use of the barrier bar.
6 Assembling the Unit
► Pull the protective caps off of the ends of the
shaft and keep them in a safe place for later
use – see "Storing the Machine"
6.1 Connecting drive tube to gear‐
box
2
► Loosen the clamping screw (1) on the gearbox
– do not remove
► Insert curved end of drive tube (3) in the gear‐
box (2), turn the gearbox back and forth as
necessary.
► Push the shaft (3) in as far as it will go.
► Screw in the clamping screw (1) as far as it will
go – do not tighten yet!
0458-471-0121-C
1
2
4
► Align the gearbox (2) on the shaft so that the
rib (4) is in line with the shaft.
► Tighten the clamping screw firmly.
7

Mounting the KombiTool

2
► Push the lug (1) on the drive tube into the
slot (2) in the coupling sleeve as far as stop.
English
1
3
4
9