Mounting The Kombitool - Stihl FH-KM Instruction Manual

English
Mounting the Gearbox
2
1 1
3
Loosen the clamp screws (1).
N
Push the gearbox (2) onto the drive
N
tube (3), turn the gearbox (2) back
and forth as necessary.
10
2
4
Once the end of the drive tube is
inserted beyond the slot in the clamp (4):
Push the gearbox (2) fully home as
N
far as stop.
Tighten down the clamp screws
N
moderately.
Line up the gearbox (2) on the drive
N
tube so that the machine support on
the engine points down and the
blades are horizontal.
Tighten down the clamp screws
N
firmly.

Mounting the KombiTool

2
1
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
3
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the star knob (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the drive tube.
FH-KM