Panasonic SC-MAX4000 Operating Manual page 17

This system automatically switches off when you do not
use it for approximately 20 minutes.
1 Press [SETUP] to select "AUTO OFF" .
2 Press [Y, U] to s e le ct " ON " and then press [OK].
To cancel, select "OFF" .
Note:
This function does not work when you are in radio source or
when a Bluetooth® device is connected.
This function automatically switches on the system when
you establish a Bluetooth® connection from a paired
device.
1 Press [SETUP] to select " BLUETOOTH STANDBY" .
2 Press [Y, U] to s e le ct " ON " and then press [OK].
To cancel, select "OFF" .
Note:
Some devices may take longer to respond. If you are
connected to a Bluetooth® device before switching off the
system, wait for a minimum of 5 seconds before connecting
to this system from your Bluetooth® device again.
You can check the software version of the system.
1 Press [SETUP] to select " SW VER." and then press
[OK].
The software version is shown.
2 Press [OK] again to exit.
To clean th is system , w ipe w ith a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
17
17