Panasonic SC-MAX4000 Operating Manual page 16

Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
Components and cables are sold separately.
You can connect a VCR, DVD player etc. and listen to the
audio through this system.
1 C onnect the external equipm ent.
2 Press [CD/RADIO/AUX] to select "AUX 1 " .
3 Play the external equipm ent.
Note:
• If you want to connect equipment other than those
described, refer to the audio dealer.
• Sound distortion can occur when you use an adaptor.
16
16
DVD player
(not supplied)
You can play music from a portable audio equipment.
Preparation
• Switch off the equaliser (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
1 C onnect the portable audio equipm ent.
Plug type: 0 3.5 mm stereo
2 Press [CD/RADIO/AUX] to se le ct "AUX 2 " .
3 Play the portable audio equipm ent.
1 Press [PLAY MENU] to select " INPUT LEVEL" .
2 Press [Y, U] to select " NORMAL" o r " HIGH" and
then press [OK].
Note:
• You cannot adjust the input level during recording.
• Select " NORMAL" if the sound is distorted during "HIGH"
input level.
• Read the operating instructions of the portable audio
equipment for details.