Colors Bars/Audio Reference Signal - Canon XC10 Instruction Manual

Colors Bars/Audio Reference Signal

You can have the camcorder generate and record color bars and a 1 kHz audio reference signal. The color bars
can be output from the HDMI OUT terminal while the audio reference signal can be output from the HDMI OUT
and × (headphone) terminals.
Operating modes:
Recording Color Bars
You can choose between SMPTE color bars and ARIB multi-format color
bars. For 4K clips, the color bars will be recorded in 4K (3840x2160) but
will be output from the HDMI OUT terminal in HD (1920x1080).
1 Press the MENU button.
2 Open the [Color Bars] submenu.
[3 Recording Setup] > [3] > [Color Bars]
3 Select the type of color bars and then touch [X].
• The selected color bars appear on the screen and will be recorded when you press the START/STOP
button.
• Select [j Off] to turn off the color bars.
• Turning the camcorder off or changing the operating mode to playback mode will deactivate the color bars.
Recording an Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal.
1 Press the MENU button.
2 Open the [1 kHz Tone] submenu.
[3 Recording Setup] > [3] > [1 kHz Tone]
3 Select the desired level and then touch [X].
• Available levels are -12 dB, -18 dB and -20 dB.
• Select [j Off] to turn off the signal.
• The signal is output at the selected level and will be recorded when you press the START/STOP button.
Table of Contents
Colors Bars/Audio Reference Signal
Menus
[3 Recording Setup]
3]
[
[Color Bars]
[j Off]
[3 Recording Setup]
3]
[
[1 kHz Tone]
[j Off]
Index
85