Canon XC10 Instruction Manual page 72

Adjusting the Focus
NOTES
• The camcorder may mistakenly detect the faces of non-human subjects. In such case, turn face detection off.
• When the shooting mode is set to N, face detection & tracking will automatically be set to [i On }]
72
and cannot be changed.
• In certain cases, faces may not be detected correctly. Typical examples include:
- Faces extremely small, large, dark or bright in relation to the overall picture.
- Faces that are turned to the side, upside-down, at a diagonal or partially hidden.
• Face detection cannot be used in the following cases:
- When the shutter speed used is slower than 1/30 (1/24 if the frame rate set in [
> [4K Recording] or [HD Recording] is 23.98P).
- When the shooting mode is set to ƒ and [
- When [Slow & Fast Motion] is set to [x1/4].
- In mode, when drive mode is set to [
- When the [v Camera Setup] > [2] > [Rolling Shutter Reduction] setting is set to [i On
Table of Contents
Night Scene], [ Low Light] or [
AF Continuous].
Menus
3
Recording Setup] > [1]
Fireworks] is selected.
].
Index