Canon XC10 Instruction Manual page 101

Summary of index screens
Index screen Index screen button
[y4K] [
[yHD] [8
[}]
1 Index screen button. Touch to change the index
screen.
2 Drag your finger left/right for the next/previous
index page.
Switching to Playback Mode from
When you hold the ^ button pressed down during
playback mode and display the last clip or photo recorded, depending on the position of the movie/photo
switch. For clips, touch [Ð] to start playback. The playback controls are the same as when playing back a
recording from the index screen.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may
result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the recording media slot cover.
NOTES
• You may notice brief stops in video or audio playback between clips.
• The following photos may not be displayed correctly.
- Photos not recorded with this camcorder.
- Photos created or edited on a computer.
- Photos whose file names have been changed.
Table of Contents
Type of recording and
recording media
] 4K clips recorded on the CFast card.
] HD clips recorded on the SD card.
[8] Photos recorded on the SD card.
1
2
3
4
or Mode
2
3
5 6
3 Display the next/previous index page.
4 Delete recordings (A 108).
5 Folder number (for photos; A 135).
6 Clip information (for clips; A 105).
or mode, the camcorder will switch to
Menus
Playback
101
Index