Canon XC10 Instruction Manual page 55

To change the aperture value when the shooting mode is n or "
1 Press the current aperture value on the Browser Remote screen.
2 Select the desired aperture value from the list.
• The selected value will be displayed on the Browser Remote screen and applied on the camcorder.
• Alternatively, you can press [IRIS +] to open the aperture or [IRIS -] to close the aperture in 1/16-stop
increments.
To change the shutter speed when the shooting mode is n or
1 Press the current shutter speed value on the Browser Remote screen.
2 Select the desired shutter speed value from the list.
• The selected value will be displayed on the Browser Remote screen and applied on the camcorder.
To change the ISO speed or gain when the shooting mode is n
1 Press the current ISO speed or gain value on the Browser Remote screen.
• Note that during
• You can touch [ISO] and then the desired setting ([ISO] or [Gain]) to switch between the two.
2 Select the desired ISO speed or gain value from the list.
• The selected value will be displayed on the Browser Remote screen and applied on the camcorder.
Table of Contents
mode, you cannot adjust the gain.
‚
Menus
Shooting Modes
55
Index