Ae Shift - Canon XC10 Instruction Manual

• An adjustment dial will appear on the bottom of the screen. The exposure is locked but you can adjust it
using the adjustment dial.
3 Drag your finger left/right along the dial to select the desired value.
• You can also push the joystick up/down until the position of the current value is highlighted in orange and
then push left/right to adjust the value.
• When using only touch exposure, skip to step 6. To use the highlights setting, continue to step 4.
4 Touch [ ] and then touch [
• Touch [ Normal] to turn off the highlights setting.
5 Touch [K] to return to the exposure adjustment screen.
6 Touch [X] to lock the exposure at the selected value.
• If the exposure was just locked,
locked and adjusted, in addition, y and the selected exposure value will appear to the left of

AE Shift

When using AE shift, you can select from 17 AE shift levels for clips and 13 for photos.
1 Touch [FUNC.] and then touch y [AE Shift].
• An adjustment dial will appear on the bottom of the screen.
2 Drag your finger left/right to move the adjustment dial to the desired setting.
• You can also push the joystick itself so that the position of the current setting is highlighted in orange and
then push left/right to adjust the setting.
3 Touch [X].
• y and the selected AE shift level will appear on the left side of the screen.
Available AE shift levels for clips
-2 -1 3/4 -1 1/2
+1/4 +1/2 +3/4
Available AE shift levels for photos
-2 -1 2/3 -1 1/3
+1/3 +2/3 +1
NOTES
• AE shift is not available if exposure lock or touch exposure have been enabled.
Table of Contents
Highlights].
will appear on the left side of the screen. If the exposure value was
-1 1/4 -1 - 3/4
+1 +1 1/4 +1 1/2
-1 - 2/3 - 1/3
+1 1/3 +1 2/3 +2
- 1/2 - 1/4 ±0
+1 3/4 +2
±0
Menus
Exposure
59
.
Index