Wind Screen (Built-In Microphone) - Canon XC10 Instruction Manual

Recording Audio
NOTES
• When the audio level meter reaches the red point (0 dB), the sound may be distorted.
• We recommend using headphones to check the sound level while adjusting the audio recording level or when
80
the microphone attenuator is activated.

Wind Screen (Built-in Microphone)

The camcorder automatically reduces the background sound of wind
when recording outdoors. You can select from two levels or turn off the
auto wind screen.
1 Make sure ' [Audio Scene] is set to [„ Custom Setting]
(A 78).
2 Press the MENU button.
3 Open the [Built-in Mic Wind Screen] submenu.
[¡ Audio Setup] > [1] > [Built-in Mic Wind Screen]
4 Select the desired option and then touch [X].
Options
[H Auto (High)]:
[L Auto (Low) ]: The camcorder will reduce a small amount of noise from the wind. A small amount of low-
[j Off à]:
NOTES
• Some low-frequency sounds will be suppressed along with the sound of wind. When recording in
surroundings unaffected by wind or if you want to record low-frequency sounds, we recommend setting
[Built-in Mic Wind Screen] to [j Off à].
Table of Contents
The camcorder will reduce a large amount of noise from the wind. Low-frequency sounds will also
be reduced.
frequency sounds will also be reduced.
The built-in microphone's wind screen will be deactivated at all times.
Menus
[¡ Audio Setup]
[1]
[Built-in Mic Wind Screen]
[H Auto (High)]
Index