Canon XC10 Instruction Manual page 62

White Balance
• Using a custom white balance may provide better results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
62
- Under mercury lamps, certain types of fluorescent lights and LED lights
• Depending on the type of fluorescent light, optimal color balance may not be obtained with [¿ Fluorescent]
or [ Fluorescent H]. If the color looks unnatural, select [
Remote Operation Using Browser Remote
After completing the necessary preparations (A 125), you can change the white balance option remotely from a
connected device using the Browser Remote application.
1 Press the white balance button on the Browser Remote screen.
To set automatic white balance (
2 Select .
• The selected option will be displayed on the Browser Remote screen and applied on the camcorder.
To set a preset white balance option
2 Select the desired option.
• If you selected [È], continue to the next step to set the color temperature. Otherwise, the selected option
will be displayed on the Browser Remote screen and applied to the camcorder; you do not need to perform
the rest of the procedure.
3 Press [5500K] and then selected the desired value from the list.
• The selected value will be displayed on the Browser Remote screen and applied on the camcorder.
To set custom white balance ([
2 Point the camcorder at a gray card or white object so it fills the whole screen.
3 Select [ ] or [
4 Press [Å].
• During the procedure, [
the setting will be applied on the camcorder.
Table of Contents
)
] and [ ])
].
] or [ ] will flash quickly. When it stops flashing, the procedure is completed and
Automatic] or a custom white balance setting.
Menus
Index