Front Panel - Panasonic AJ-SD930BE Operating Instructions Manual

CONTENTS
Setup menus
USER menu
<BASIC>
No./Item
000 This sets the preroll time.
The preroll time can be set from 0 to 15 seconds
P-ROLL TIME in 1-second increments.
0000 0s
: :
0005 5s
: :
0015 15s
001 This selects the buttons which can be operated
on the front panel when the CONTROL switch
LOCAL ENA has been set to REMOTE.
0000 DIS :
No buttons can be operated.
0001 ST&EJ :
Only the STOP and EJECT buttons can be
operated.
0002 ENA :
AJ-SD955B: All
AJ-SD930B: All buttons can be operated.
002 This selects the 12 or 24 hour display for the
CTL counter.
TAPE TIMER
0000 ±12h : 12 hour display
0001 24h : 24 hour display
003 This selects whether the remaining tape time
and total tape length are to be displayed in the
REMAIN SEL superimposed display of the VIDEO OUT 3/
SDI OUT 3 connector signals.
0000 OFF : No display.
0001 2L :
The remaining tape time is displayed on the
second line.
0002 1L :
The remaining tape time is displayed on the
first line.
0003 R/TTL :
The remaining tape time is displayed on the
first line, and the total tape length is displayed
in the second line.
<Notes>
OWhen "2L" is selected, the remaining tape time
is not displayed if "TIME" has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
OWhen "R/TTL" is selected, the total tape length
is not displayed if "TIME" has been selected as
the setup menu item No.008 (DISPLAY SEL)
setting.
The underlined items indicates the initial setting.
Description
<Note>
When the automatic editing
mode [PREVIEW, AUTO EDIT]
is set, the unit will not operate if
the preroll time is set to 0
seconds.
buttons except for the
RECORDER and PLAYER
buttons can be operated.
No./Item
006 SD955B This selects whether or not to synchronize
between two VTRs.
SYNCHRONIZE
0000 OFF :
No synchronization. The editing points deviate
several frames, but editing can be started
quickly.
0001 ON :
Synchronization. Allows for error-free editing.
008 This selects what information is to be
provided by the time code and other super
DISPLAY SEL displays output to the VIDEO OUT 3/SDI OUT 3
connector.
0000 TIME : Data only.
(The data indicates the value for whichever of
CTL, TC or UB currently selected by the
COUNTER button.)
0001 T&STA : Data and operation status.
0002 T&S&M : Data,
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE (year/month/day)
0005 T&MDY :
Data and REC DATE (month/day/year)
0006 T&DMY :
Data and REC DATE (day/month/year)
0007 T&UB :
Data and user's bit.
However, when UB has been selected with the
COUNTER button, the time code is displayed
after the user's bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been selected with
the COUNTER button, the time code is
displayed after the CTL data.
0009 T&T :
Data and time code.
0010 VITC:
The time code and user's bit recorded in the
VAUX area are displayed.
<Notes>
OMode display:
DVCPRO 50 (50 Mbps) = DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
OAn error message appears if a warning or error
has occurred when "T&S&M" has been
selected as this setting.
OREC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With the
DVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)
format, the operating mode is displayed.
Description
operation status and
mode.
35 (E)