Disassembly Procedures; Removal Of Top Panel; Removal Of Bottom Panel; Removal Of Front Panel - Panasonic DVCPRO HD EX AJ-HD1200AP Service Manual

Disassembly Procedures

1-1. Removal of Top Panel

1. Unscrew the two screws (A).
2. Lift up the Top Plate slightly and remove it to
the front.

1-2. Removal of Bottom Panel

1. Unscrew the four screws (B).
2. Unscrew the four screws (C) and remove the
Bottom Panel.
(C)
(B)

1-3. Removal of Front Panel

1. Unscrew the seven screws (D) and release the
two lock claws.
(D)
(D)
(A)
(B)
(C)
(D)
2. Open the Front Panel to the front.
3. Disconnect the three connectors (P66002,
66003, 66004) and remove the Front Panel.
P66003
P66004

1-4. Removal of Front-loading Unit

1. Disconnect the connector of the loading motor
and the connector (P1).
CONNECTOR
P1
2. Push the red plastic screw in front of the worm
gear of the cassette-down motor with a
screwdriver and turn it counterclockwise to
move the cassette holder to the position where
the two screws (E) can be seen as shown the
next figure.
DIS-1
P66002