English
Fitting the Carrying Ring
Polymer Version
1
For position of carrying ring see "Main
Parts".
Push the carrying ring (1) over the
N
drive tube.
Insert the M5 nut in the hex recess
N
in the carrying ring.
Fit the M5x14 screw.
N
Line up the carrying ring.
N
Tighten down the screw firmly.
N
Metal Version
The carrying ring comes standard with
the machine or is available as a special
accessory.
16
1
1
2
For position of carrying ring see "Main
Parts".
Place the clamp (1) against the
N
drive tube with the tapped hole on
the left (viewed from engine).
Squeeze the two ends of the clamp
N
together and hold in that position.
Insert the M6x14 screw (2).
N
Line up the carrying ring.
N
Tighten down the screw firmly.
N
Mounting the Deflector
Use the Right Deflector
A
WARNING
Deflector (A) with skirt and blade is only
approved for mowing heads.
B
WARNING
Deflector (B) without skirt and blade is
only approved for grass cutting blades.
FS 94, FS 94 R, FS 94 C, FS 94 RC