Storing The Machine - Stihl FS 94 Instruction Manual

Checking the Spark Plug
Clean dirty spark plug.
N
Check electrode gap (A) and
N
readjust if necessary – see
"Specifications".
Rectify the problems which have
N
caused fouling of the spark plug.
Possible causes are:
Too much oil in fuel mix.
–
Dirty air filter.
–
Unfavorable running conditions.
–
WARNING
Arcing may occur if the adapter nut (1) is
loose or missing. Working in an easily
combustible or explosive atmosphere
may cause a fire or an explosion. This
can result result in serious injuries or
damage to property.
FS 94, FS 94 R, FS 94 C, FS 94 RC
Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the Spark Plug
Fit the spark plug and tighten it
N
down firmly.
Press the boot firmly onto the spark
N
plug.
A
2
Fit the cap (1), insert the screw (2)
N
and tighten it down firmly.
1

Storing the Machine

For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
1
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Coat metal
cutting attachments with corrosion
inhibitor.
Thoroughly clean the machine.
N
Clean the air filter.
N
Store the machine in a dry and
N
secure location – out of the reach of
children and other unauthorized
persons.
English
29