Fitting The Carrying Ring; Mounting The Deflector - Stihl FS 70 Instruction Manual

6 Fitting the Carrying Ring

6 Fitting the Carrying Ring
6.1 Polymer Version
For position of carrying ring see "Main Parts".
► Push the carrying ring (1) over the drive tube.
► Insert the M5 nut in the hex recess in the car‐
rying ring.
► Fit the M5x14 screw.
► Line up the carrying ring.
► Tighten down the screw firmly.
6.2 Metal Version
The carrying ring comes standard with the
machine or is available as a special accessory.
0458-570-8321-B
1
2
For position of carrying ring see "Main Parts".
► Place the clamp (1) against the drive tube with
the tapped hole on the left (viewed from
engine).
► Squeeze the two ends of the clamp together
and hold in that position.
► Insert the M6x14 screw (2).
► Line up the carrying ring.
► Tighten down the screw firmly.
7

Mounting the Deflector

7.1 Use the right deflector
English
1
1
1
15