Fitting The Carrying Ring; Mounting The Deflector - Stihl FS 120 Instruction Manual

English

Fitting the Carrying Ring

The carrying ring comes standard with
the machine or is available as a special
accessory.
1
1
2
For position of carrying ring see "Main
Parts".
Place the clamp (1) against the
N
drive tube with the tapped hole on
the left (viewed from engine).
Squeeze the two ends of the clamp
N
together and hold in that position.
Insert the M6x14 screw (2).
N
Line up the carrying ring.
N
Tighten down the screw firmly.
N
24

Mounting the Deflector

Mounting the Deflector
1
3
2
3
1 Deflector for mowing attachments
2 Deflector for mowing heads
Deflectors (1) and (2) are both mounted
to the gearbox in the same way.
Place the deflector on the gearbox
N
flange.
Insert the screws (3) and tighten
N
them down firmly.
Fitting the Skirt and Blade
4
1
5
These parts must be fitted to the
deflector (1) when you use a mowing
head.
Slide the lower guide slot of the skirt
N
(4) onto the deflector (1) – it must
snap into position.
Push the blade (5) into the upper
N
guide slot on the skirt and line it up
with the first hole.
Insert the screw and tighten it down
N
firmly.
FS 120, FS 120 R, FS 200, FS 250, FS 250 R
4