Connections - Panasonic WV-CF254 Operating Instructions Manual

CONNECTION
Precaution:
The following connections should be made by qualified service personnel or system installers in accor-
dance with NEC 725-51.
• Power supply connection
Recommended wire gauge sizes for 24 V AC line.
#24
Copper wire size
(AWG)
(0.22mm
Length
(m) 20
of Cable
(ft) 65
(Approx.)
Accessory Connector Information
Pin No. Power Source
1 : 24 V AC LIVE
2 : 24 V AC NEUTRAL
3 : Ground
4 : Not used
How to assemble the cable with the accessory
connector
Strip back the cable jacket approx. 3 mm (1/8 inch)
and separate the individual conductors.
Approx.
3 mm (1/8 inch)
A
Up
Contact
24V AC
Video Output Cable
#22 #20 #18
2 ) (0.33mm 2 ) (0.52mm 2 ) (0.83mm
30 45 75
100 160 260
4 3
2 1
Wire
Insert
Insert the wire until A position
and clamp the contacts.
BNC
Plug
Prepare the individual conductors for clamping.
Use MOLEX band tool part number 57027-5000
(for UL-Style Cable UL1015) or 57026-5000 (for UL-
2 )
Style UL-1007) for clamping the contacts.
After clamping the contacts, push them into the
proper holes in the accessory connector of this
camera until they snap in place.
CAUTIONS
1. Shrinking the cable-entry seal is a one-time
procedure. Do not shrink the cable-entry
seal until it has been ascertained that the
unit is functioning.
CONNECT THIS TO 24V AC CLASS 2
POWER SUPPLY ONLY.
2. To prevent fire or electric shock hazard, the
UL listed wire VW-1 style 1007 should be
used for the cable for 24V AC Input
Terminals.
-5-
Coaxial Cable
To Video IN
(CAMERA IN)
BNC Plug
Up
Contact
Wire