Connections For Access Point; Initial Setup - Panasonic KX-HN7002 Installation Manual

Home monitoring camera homehawk front door, homehawk front door/outdoor
Hide thumbs Also See for KX-HN7002:
Table of Contents

Advertisement

Available languages

Available languages

Setup
https://panasonic.net/cns/pcc/support/
homehawk
®
®
R iPhone
and iPad
Android™ devices (Android 4.1 and later)
(As of October 2017)
Note:
R The [HomeHawk] app may not function
properly depending on the system
environment, such as the model of your
mobile device, peripherals connected to
your mobile device, and the apps installed
on your mobile device.
R The following Android devices are not
compatible with the [HomeHawk] app.
– Android devices that are not supported
by Google Play™
– Android devices with limited hardware
features (Bluetooth, wireless LAN, and
microphone support are required.)
Connections for access
point
Note:
R Use only the supplied AC adaptor.
1
Insert the AC adaptor DC plug into the
DC jack (A), then connect the AC
adaptor to the power outlet (
2
Insert the Ethernet cable into the LAN
jack (B), then connect the Ethernet cable
2
to your router (
For assistance, please visit http://shop.panasonic.com/support
24
HN7001̲(en̲en)̲0209̲ver.140.pdf   24
(iOS 10.0 and later) or
1
).
).
3
Insert a microSD card (not supplied) into
the unit's microSD card slot (C).
3
1
1
2
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Power failure
R The access point will not work during a
power failure.

Initial setup

Confirm the following before you begin.
– Make sure you have installed the
[HomeHawk] app on your mobile device
– Make sure the access point and your
wireless router are turned on and the
access point's LED indicator is blinking
quickly in amber or lit in green
– Make sure your access point and mobile
device are connected to your wireless router
– Make sure your mobile device can connect
to the Internet
2
2018/02/09   11:33:53

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Kx-hn7001Kx-hn7003Kx-hn7003wKx-hn70032w

Table of Contents