Table of Contents
Advertisement
Configuring the HTTPS connection (®page 145)
Generation of the CRT key (SSL encryption key) (®page 146)
Generation of CSR (Certificate Signing Request) (®page 147)
Installation of the server certificate (®page 149)
Note
•
To use the CA certificate, you need to apply for the approval and the issue of server certificate by CA.
12.3.1 Configuration of HTTPS connections
1.
Select "HTTPS" to access the camera in [HTTPS – Connection].
2.
Select the certificate to be used with HTTPS with [HTTPS – Select certificate].
•
When using a pre-installed certificate: Select "Pre-installed".
•
When using a CA certificate: Select "CA".
Note
•
"CA" can only be selected when a CA certificate has been added. Refer to page 144 for information
on how to add a CA certificate.
3.
Designate the HTTPS port number to be used for [HTTPS – HTTPS port].
•
Available port number: 1 - 65535
•
Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 - 61000
4.
Click the [Set] button.
→
It will become possible to access to the cameras using the HTTPS protocol.
Refer to the following for information on methods to access cameras using HTTPS.
•
When using a pre-installed certificate: page 150
•
When using a CA certificate: page 161
•
Monitor images on a PC: page 8
•
Monitor images on a cellular phone: page 18
•
Monitor images on a mobile terminal: page 20
12 Configuring the network settings [Network]
A
B
C
D
Operating Instructions
145
Advertisement
Table of Contents
