Connections - Panasonic KX-HNC800B Installation Manual

Setup

Connections

1
2
3
Note:
R Use only the supplied AC adaptor S006AKU0500100.
R To remove the microSD card, push in the microSD card and then
remove it.
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or
floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
Power failure
R The camera will not work during a power failure.
16
HNC800_(en_en)_0902_ver.220.pdf
Insert the AC adaptor plug
(A) firmly into the camera's
micro-USB connector.
Connect the AC adaptor (B)
to the power outlet.
Insert a microSD card
(user-supplied; C) into the
camera's microSD card slot.
(This is not necessary if you
do not want to record camera
images.)
For assistance, please visit http://shop.panasonic.com/support
16
B C
A
2016/09/05 17:54:30