Adjustment - Panasonic WV-CF254 Operating Instructions Manual

ADJUSTMENT

1. Panning
The Panning table can be moved between the
guide lines.
Panning table
2. Tilting the camera
The tilting angle is shown below.
Note: Uprighting the picture on the monitor screen
is usually necessary. (Refer to 3. Uprighting
the picture.)
Guide lines
77.5° (max)
-9-
3. Uprighting the picture
Loosen the 2 lens holders and bring the pic-
ture in an upright position on the monitor
screen by turning the camera head.
4. Focusing
Precaution:
The focus adjustment should be done at
the same time as the camera angle adjust-
ment.
Zoom lock lever
Focus lock lever
4-1. Loosen the zoom lock lever.
4-2. Set the angular field of view according to the
scene desired.
4-3. After setting the angular field of view, tighten
the zoom lock lever.
4-4. Loosen the focus lock lever.
Lens holders
Focus ring