Yamaha RX-V3900 Owner's Manual page 91

■ Initial Set (Initial settings)
Audio Select (Default audio input jack select)
Use this feature to designate the default audio input jack
select setting (page 38) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Choice
Auto Automatically detects the type of audio input
signals and selects the appropriate audio input
jack select setting.
Last Automatically selects the last audio input jack
select setting used for the connected input
source.
Decoder Mode (Default decoder mode)
Use this feature to designate the default decoder mode
(page 64) for the input sources when you turn on the
power of this unit.
Choice
Auto
Automatically detects the type of input signals
and select the appropriate decoder mode setting.
Last Automatically selects the last decoder mode
setting used for the connected input source.
EXTD Surround (Default extended surround
decoder mode setting)
Use this feature to designate the extended surround
decoder mode (page 65) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Choice
Auto Automatically detects the input digital audio
signals and activates the appropriate decoder.
Last Selects the last selected extended surround
decoder mode.
Functions
Functions
Functions
Graphical user interface (GUI) menu
■ Trigger Output (Trigger output)
Use this feature to select the functions of each TRIGGER
OUT jack of this unit.
Choice
Trigger1 Sets the functions for the TRIGGER OUT 1
jack.
Trigger2 Sets the functions for the TRIGGER OUT 2
jack.
Trigger Mode (Trigger mode)
Choice
Power Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected zone is turned on.
Source Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected input source is selected.
Manual Select this setting to send the voltage signals
manually.
Target Zone (Target zone)
Note
This setting is not available when "Trigger Mode" is set to
"Manual".
Choice
Main
Main zone
Zone2 Zone 2
Zone3 Zone 3
All Main zone, Zone 2, and Zone 3
Input Level (Input level)
Select the input source and then set the input level applied
to the selected input source.
Note
This setting is available only when "Trigger Mode" is set to
"Source".
Choice
High Sends the voltage when the input source is
selected.
Low Stops sending the voltage when the input source
is selected.
Function
Descriptions
Target zone
Descriptions
89
En