Yamaha RX-V3900 Owner's Manual page 78

Graphical user interface (GUI) menu
Front Input
(Front channel input jacks)
If you selected "8ch" in "Input Channels", you can select
analog jacks at which front left and right channel signals
from an external decoder will be input.
Choices: CD, TV, MD/CD-R, BD/HD DVD, DVD,
CBL/SAT, DVR, VCR, VIDEO AUX
Note
If you have renamed an input source in "Input Rename"
(page 87), the name of the input source appears in the choices of
this parameter.
■ BGV (Back ground video)
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
Choice
BD/HD DVD, Selects the corresponding input source as the
background video source.
DVD, CBL/SAT,
DVR, VCR,
VIDEO AUX
Off
Does not play the video source in the
background.
Note
If you have renamed an input source in "Input Rename"
(page 87), the name of the input source appears in the choices of
this parameter.
■ Pairing (Bluetooth pairing)
Use this feature to start pairing the connected Yamaha
Bluetooth wireless audio receiver (such as YBA-10, sold
separately) with your Bluetooth component. For details
about the pairing, refer to "Pairing the Bluetooth™
receiver and your Bluetooth component" (page 55).
To ensure security, a time limit of 8 minutes is set for the
pairing operation. You are recommended to read and fully
understand all the instructions before starting.
1
Press 9ENTER to start pairing.
The connected Bluetooth receiver starts searching
Bluetooth components.
2
Check that the Bluetooth component detects
the Bluetooth receiver.
For details, refer to the instruction manual of the
Bluetooth component.
3
Select the Bluetooth receiver in the
Bluetooth device list and then enter the pass
key "0000" on the Bluetooth component.
Once this unit completes the pairing successfully,
"Completed" appears.
76
En
Functions
4
Press 9l to return to the previous menu
level.
Note
If the connected Bluetooth receiver cannot find any
Bluetooth components, "Not found" appears.
■ Connect (Bluetooth connection)
Use this feature to establish a connection between the
Yamaha Bluetooth wireless audio receiver (such as YBA-
10, sold separately) and your Bluetooth component.
Note
Pairing must be performed when using a Bluetooth component
with the Bluetooth receiver connected to this unit for the first
time of if the pairing data has been deleted.
Press 9ENTER to establish a connection.
The connected Bluetooth receiver starts searching
Bluetooth components. Once the connection is established
successfully, "BT Connected" appears.
Note
If the connected Bluetooth receiver cannot find any Bluetooth
components, "Not found" appears.
y
To terminate the connection, press 9ENTER again.
Music Content
Use this feature to browse the music contents of iPod,
USB component, PC/MusicCAST and Internet radio. See
the following pages for details.
• iPod (page 57)
• USB (page 59)
• PC/MCX (page 59)
• NET RADIO (page 59)