Rinnai RHFE-308FTR How To Use Manual page 28

AIR INLET HOSE
a
'b
Attach the Air Inlet Hose to the flue
manifold on either inlet position a or b.
The unused inlet is plugged with the
rubber cap supplied on the manifold.
EXHAUST PIPE & LOCKING CLAMP
The following components can be fitted by
reaching down the rear of the appliance as it is
positioned against the wall.
1.
Manifold
Connect the flue elbow to the manifold
by moving the appliance into position,
Locking clamp
Manifold
Fit the locking clamp over the
connection between the flue elbow
and the manifold. Engage the hook
and rotate it until it snaps against the
body of the clamp.
Locking clamp
4.
Fit Clip
Slide the insulation sleeve up to the
flue manifold and slip the securing
clip over the sleeve as shown
- 27 -