Rinnai RHFE-308FTR How To Use Manual page 18

This function is intended to be used to manually override the current operation of the heater, For
example; if the heater is in standby mode (i.e. between finishing time and starting time of a Timer),
and the Override button is selected, then the heater will begin to operate, and heat the room.
To operate the Override simply press the Override
button. The Override indicator will flash.
cl
2 2
To manually deactivate the Override simply press
the Override button again. The Override indicator
will go out, and the heater will return to standby
mode.
The heater will continue to operate on Override until the Override button is pressed again, or one
of the Timers takes over the operation of the appliance. This means that the Override mode will
automatically drop out if a programmed Starting time is reached. The appliance will then return
to operating at times programmed into the Timer(s).
To Turn ON or OFF
Remote Control will not turn heater ON if
(d)
To manually operate
when Timer(s) are
not selected, simply
press the ON or OFF
button.
To Change Temperature
To alter the
temperature at any
time while the heater
is operating, simply
press the n A )( or
" V " buttons.
.
If the Timer(s) have been selected, and the heater is in standby mode, and the OFF button on the
Remote Control is pressed, the Timer(s) will be deactivated.
-17 -