Rinnai RHFE-308FTR How To Use Manual page 14

/hen the appliance is first plugged in and then turned on, the Digital Display will show - - : - -.
As an example, let's set the clock to 10% am.
)PEN THE CONTROL PANEL-SEE PAGE 9.
1 1
When the appliance is first plugged in or after a
power failure, the Digital Display will show - -: - -.
Press the Set Times button once, the Clock
Indicator will flash.
2
1
-_
Press and hold the "A" button; the minutes ,4l
begin to change first, then the time will change by
whole hours. Release the button when AM 10:00
shows on the Digital Display. Confirm that you
have selected AM, a small indicator on the left
hand side of the Digital Display indicates the AM
setting.
Press and hold the "A" button again, release the
button when AM lo:35 shows. If you go past
AM lo:35 then the "V" button can be used to
change the time settings in reverse.
1
3
Press the Timer Set button five times to lock
in and complete setting the time. The Clock and
Timer indicators will go out. A small indicator
on the Digital Display will flash to show that the
clock is operating.
-13-