Brew Programming; Cleaning The Appliance - SEVERIN KA4813 Operating Instructions Manual

6 Brew programming

CAUTION!
If the programme has already been selected and
the " " button has turned blue, you can no longer
modify the programme time, coffee strength or
number of cups. To make any changes you need to
turn off the programme setting by briefly pressing
the " " button.
When you program the brewing function, the coffee maker will brew coffee to
the programmed settings at the set time.
1. Program the required settings for the brew, ►"5.1 With coffee beans"
on page 26 or ►"5.2 With ground coffee" on page 28.
2. Press and hold the " " button for 2 seconds.
 The time is shown flashing.
3. Repeatedly press the " " button to set the hour.
4. Repeatedly press the " " button to set the minutes.
" button to confirm your entry.
5. Press the "
 The current time and "
button turns blue. The coffee maker will brew coffee to the pro-
grammed settings at the set time.
6. Press the " " button again to switch off programmed brewing function.
 The "
" button turns white. Programmed brewing is switched off.
" are shown on the display. The "

7 Cleaning the appliance

WARNING!
Risk of scalding!
– Before cleaning: Unplug the power plug
WARNING!
Risk of injury and damage to the appliance!
– Never immerse the appliance in water!
WARNING!
Health risks by use of incorrect cleaning agents!
– Only use food-safe cleaning agents to clean the
CAUTION!
"
Do not use abrasive or aggressive cleaning agents
or utensils that could scratch the surfaces. Do not
put the appliance in the dishwasher.
from the socket and allow the appliance and its
components to completely cool down (at least
30 minutes).
parts that come in contact with water and coffee.
8
GB
29