Changing The Settings For Preparation Of Tea - SEVERIN Fino Multi KA4566 Instructions For Use Manual

Changing the settings for preparation of tea

The beverage quantity
adjusted and saved in interval steps (also see table in section „3.4 Beverage
quantity, brewing temperature and steep time – overview"). Steps 1 to 8
must always be completed. The settings are adjusted and saved separately
for the black lid (E.1) ( rst tea type) and for the green lid (E.2) (second tea
type), respectively.
Note: The beverage quantity can only be set in intervals 3 to 5
!
Beverage quantity
1. Place the strainer support for tea with the desired lid into the appliance
as described above.
2. Press and hold the Start/Stop button (H.5)
elements (H.1) and (H.4)
3. Through repeated short pressing of the Start/Stop button (H.5)
can increase the beverage quantity by one interval step, respectively. If
the maximum beverage quantity has been reached and you press the
button again, setting starts again with the rst interval step.
4. When you have reached the desired setting, press and hold the Start/
Stop button (H.5)
light up.
Brewing temperature
5. Through repeated short pressing of the Start/Stop button (H.5)
can increase the brewing temperature by one interval step, respectively.
If the maximum temperature has been reached and you press the
button again, setting starts again with the rst interval step.
6. When you have reached the desired setting, press and hold the Start/
Stop button (H.5)
light up.
, temperature and steep time
light up.
until the display elements (H.2)
until the display elements (H.3)
for tea can be
.
until the display
you
and (H.4)
you
and (H.4)
13
EN