Motor Interface Plates - Siemens COMBIMASTER Reference Manual

COMBIMASTER & MICROMASTER Integrated
REFERENCE MANUAL

9.2 Motor Interface Plates

Since approximately 01/99 all 1LA5 motors used with COMBIMASTER & MICROMASTER Integrated
have been replaced with the 1LA7 equivalents. This has resulted in changes to the motor interface
plates (MIP) used with Siemens Motors.
For each inverter case size there are now 3 basic types of motor interface plate:
1LA5
1LA7
'Universal'
The 1LA5 and 1LA7 interface plates are for use with the Siemens motors.
The 'Universal' plate has been designed to simplify adapting the COMBIMASTER for other motors. In
most cases, the 'Universal' motor interface plate can be used with a simple flat metal 'Base Plate' and
no tooling is required.
The following pages describe the MIPs.
Siemens plc. 1999
© | G85139-H1731-U300-D2
68