Siemens COMBIMASTER Reference Manual page 14

COMBIMASTER & MICROMASTER Integrated
REFERENCE MANUAL
Control cable
Earth Mains
connector
connection connection
(PL800)
JP 305 connects
PI- to 0V
V JP 303
I JP 302
Jumpers for
PI input type
Default = V
Note: Jumper in 'V' position = voltage input (default)
Jumper in 'I' position = current input
Check that the supply voltage is
correct for the inverter used by
referring to the rating label.
Cable Glands: (Case Size B)
PG21 – Mains
PG16 - Signal
Figure 2 Electrical Connection (CS B)
Siemens plc. 1999
© | G85139-H1731-U300-D2
OPm2
LED LED
Potentiometer
connector
(green) (yellow)
(SK200)
JP 304 connects
AIN- to 0V
V JP 301
I JP 300
Jumpers for
Analogue input type
Default = V
IMPORTANT
Ensure that the following tightening torques are used:
Access cover retaining screws
Gland hole covers
Main connector screws
Earth connection
Control
(R314)
4.0 Nm
1.0 NM
1.0 Nm
1.5 Nm.
13