Mechanical Installation Imicromaster Integrated - Siemens COMBIMASTER Reference Manual

3.2 Mechanical Installation I
The motor / MICROMASTER Integrated
combination should be installed according
to guidelines similar to those given for the
COMBIMASTER.
Refer to MMI Motor Adaptation
Guidelines
(Ref. G85139-H1731-U500)
Available August 1999
WARNING
Cooling of the inverter must be provided, either via a cut-out in the motor Fan Cowl or by
using the inverter fan option M41
CS A:
CS B:
10
MICROMASTER Integrated
6SE9996-0XA01
6SE9996-0XA02
COMBIMASTER & MICROMASTER Integrated
REFERENCE MANUAL
First fit the Motor Interface Plate (MIP) to
the motor. In most cases the MIP makes
use of the existing motor gasket.
Siemens plc. 1999
© | G85139-H1731-U300-D2