Siemens COMBIMASTER Reference Manual page 49

Open, save and
close Project
Figure 13 Example Screen From Buskon Program Showing a Project Where 3 Drives are
SIMOVIS is then started by selecting the drive from the list and selecting drive parameterisation from
the edit menu. The drive parameter list (or part thereof) can be accessed from the Parameter menu.
48
Edit menu
Connected to the PC
COMBIMASTER & MICROMASTER Integrated
On-line access to selected drive
Siemens plc. 1999
©
REFERENCE MANUAL
| G85139-H1731-U300-D2