Switching Adaptive Highbeam Assist On/Off - Mercedes-Benz 2013 GL X166 Operator's Manual

X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Running Lights:
Daytime Running Lights:
If the
been switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps ( Y page 122).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam
Adaptive Highbeam
If the
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-.
You will see the selected setting.
X
Press a to confirm.
Sett.
menu.
Daytime
function.
have
Sett.
menu.
function.
function has
Y page 128).
Sett.
menu.
function.
Menus and submenus
X
Press the : or 9 button to adjust the
brightness to any level from
5
(bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Ambient Light Color
X
Press a to confirm.
X
Press the : or 9 button to set the
color to SOLAR, NEUTRAL
X
Press the a or % button to save the
setting.
Surround lighting and exterior lighting
delayed switch-off
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Light
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Surround Lighting
Surround Lighting
When the
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
X
Before leaving the vehicle, turn the
SmartKey to position 0 in the ignition lock.
X
Turn the SmartKey to position 2 in the
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Off Level
to
Sett.
menu.
function.
or POLAR.
Sett. menu.
function.
function is
Z
277