Mercedes-Benz 2013 GL X166 Operator's Manual page 256

Driving systems
254
Messages in the multifunction display
If a gear change process has not been successful, the following messages may be displayed
in the multifunction display:
Display messages
LOW RANGE Max.
Speed 40 km/h
LOW RANGE Shift to
Position N Briefly
LOW RANGE Shifting
Canceled Please
Reactivate
LOW RANGE Stop
Apply Parking Brake
ON&OFFROAD menu in the COMAND
display (vehicles with the
ON&OFFROAD package)
Possible causes/consequences and M Solutions
You have been driving faster than 40 km/h. Additionally, the
indicator lamp on the button in the center console blinks.
X
Drive more slowly to carry out the gear change process.
The transmission is in position D and you are driving at below
40 km/h.
X
Shift the transmission to N to complete the gear change
process.
The gear change process was not carried out.
X
Maintain all gear change conditions and carry out the gear
change process again.
A warning tone also sounds. The gear change process has not been
completed. LOW RANGE is in the neutral position. There is no
connection between the engine and the drive wheels.
! Do not drive any further. You could otherwise damage the
vehicle's drive train.
X
Stop the vehicle. Take into account the road and traffic
conditions when doing this.
X
Depress the electric parking brake (
X
Carry out the gear change process again.
If the gear change process has been carried out, the
Stop Apply Parking Brake
Y page 179).
message disappears.
You can display some driving systems, driving
programs and additional information in the
COMAND display.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Make sure that COMAND is activated, see
the separate COMAND operating
instructions.
X
Press function button :.
The corresponding displays appear in the
COMAND display:
level control
R
steering angle
R
vehicle's angle of inclination
R
LOW RANGE