Engaging Drive Position - Mercedes-Benz 2013 GL X166 Operator's Manual

Automatic transmission
168
insert the SmartKey into the ignition lock.
R
switch on the ignition.
R
depress the brake pedal and keep it
R
depressed.
shift to neutral N.
R
release the brake pedal.
R
if the electric parking brake is engaged,
R
release it.
switch off the ignition and leave the
R
SmartKey in the ignition lock.
Drive position D with ECO start/stop
function activated
The ECO start/stop function switches the
engine off automatically if:
the vehicle is braked until stationary while
R
in transmission position D and
you continue to depress the brake pedal
R
Further information on the ECO start/stop
function ( Y page 162).
Engaging drive position D
X
When the vehicle is stationary, depress the
brake pedal.
X
Push the DIRECT SELECT lever down past
the first point of resistance.
Transmission positions
Park position
B
Do not shift the transmission into
position P( Y
vehicle is stationary. The parking
lock should not be used as a brake
when parking. Always apply the
electronic parking brake in
addition to the parking lock in order
to secure the vehicle.
If the vehicle electronics are
malfunctioning, the transmission
may be locked in position P. Have
the vehicle electronics checked
immediately at a qualified
specialist workshop.
The automatic transmission shifts
to P automatically if you:
remove the SmartKey
R
switch off the engine when in R
R
or D and open one of the front
doors
Reverse gear
C
Only shift the transmission to R
when the vehicle is stationary.
page 178) unless the