Switching Adaptive Highbeam Assist On/Off - Mercedes-Benz B-Class Operator's Manual

Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press : or 9 to select the
X
Additional Speedometer [km/h]:
Additional Speedometer [mph]:
function.
You will see the selected setting:
Off.
Press the a button to save the setting.
X
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display:
You will see the selected setting
Temperature or Additional
Speedometer [mph]/Additional
Speedometer [mph].
Press the a button to save the setting.
X
i
The speed is displayed in km/h/mph.
Lights
Switching the daytime running lamps on/
off
Canada only: daytime running lamps are
required by law. You cannot set the
Driving Lights function via the on-board
computer.
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights submenu.
X
Sett. menu.
X
submenu.
or
On or
X
Further information on daytime running
lamps (
Switching Adaptive Highbeam Assist on/
off
This function is only available on vehicles with
the Intelligent Light System.
Sett. menu.
X
submenu.
X
X
function.
X
Outside
Daytime
X
For further information about Adaptive
Highbeam Assist, see (
Sett. menu.
Menus and submenus
Press a to confirm.
Press the : or 9 button to select the
Daytime Running Lights
Vehicles with black and white multifunction
display: you will see the selected setting:
On or Off.
Vehicles with color multifunction display: if
the Daytime Running Lights
has been switched on, the cone of light and
the W symbol in the multifunction
display are shown in orange.
Press the a button to save the setting.
page 105).
Y
Press the = or ; button on the
steering wheel to select the
Press the : or 9 button to select the
Lights submenu.
Press a to confirm.
Press : or 9 to select the
Adaptive Highbeam Assist
with black and white display) or
Highbeam (vehicles with color
multifunction display) function.
Vehicles with black and white multifunction
display: you will see the selected setting:
On or Off.
Vehicles with color multifunction display: if
the Adaptive Highbeam
switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.
Press the a button to save the setting.
page 108).
Y
203
function.
function
Sett. menu.
(vehicles
Adaptive
function has been
Z