Mercedes-Benz 2013 GL X166 Operator's Manual page 229

Activation conditions
The 360° camera image can be displayed if:
your vehicle is equipped with a 360°
R
camera
COMAND is switched on, see the separate
R
COMAND operating instructions.
360° Camera
the function is activated
R
Activating the 360° camera using the
SYS button
X
Press and hold the W button for longer
than 2 seconds, see the separate COMAND
operating instructions.
Depending on whether position D or R is
engaged, the following is shown:
full screen display with the image from
R
the front camera
full screen display with the image from
R
the rear camera.
Activating the 360° camera with
COMAND
X
Press the W button, see the separate
COMAND operating instructions.
X
System
Select by turning cVd the
COMAND controller and press W to
confirm.
X
360° Camera
Select
confirm.
Depending on whether position D or R is
engaged, the following is shown:
a split screen with top view and the
R
image from the front camera or
a split screen with top view and the
R
image from the rear view camera.
For further information about the COMAND
Controller, see the separate COMAND
operating instructions.
and press W to
Activating the 360° camera using
reverse gear
The 360° camera images can be
automatically displayed by engaging reverse
gear.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Make sure that the
gear
setting is active in COMAND, see the
separate COMAND operating instructions.
X
To show the 360° camera image: engage
reverse gear.
The COMAND display shows the area
behind the vehicle in split screen:
vehicle with guide lines
R
top view of the vehicle
R
Selecting the split-screen and full
screen displays
X
To switch between split screen views:
switch to the line with the vehicle icons by
sliding ZV the COMAND controller.
X
Turn cVd the COMAND controller and
select one of the vehicle symbols.
X
To switch to full screen mode: select
Full Screen
by turning cVd the
COMAND controller and press W to
confirm.
Displays in the COMAND display
Important safety notes
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
R
Use the guidelines only for orientation.
Approach objects no further than the
bottom-most guideline.
Driving systems
Activation by R
227
Z