Switching Adaptive Highbeam Assist On/Off - Mercedes-Benz C-Class Operator's Manual

Menus and submenus
212
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Inst. Cluster Inst. Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display: Permanent Display:
You will see the selected setting
Temperature Temperature or
(USA)/Speedometer [mph] Speedometer [mph]
Press the a button to save the setting.
X
i
The speed is shown in km/h (USA)/mph
(Canada).
Lights
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Day Lights Day Lights function.
If the Day Lights Day Lights
switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
Press the a button to save the setting.
X
Further information on daytime running
lamps ( page 111).
Y
Sett. Sett. menu.
submenu.
function.
Outside Outside
Speedometer [km/h] Speedometer [km/h]
(Canada).
Sett. Sett. menu.
function has been
I n f o r ma t i o n P r o v i d e d b y :
Switching Adaptive Highbeam Assist on/
off
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Adapt. Highbeam Adapt. Highbeam function.
If the Adapt. Adapt. Highbeam Highbeam
switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
Press the a button to save the setting.
X
For further information about Adaptive
Highbeam Assist, see (
Y
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
Press the = or ; button on the
X
steering wheel to select the
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround Lighting Surround Lighting function.
When the Surround Lighting Surround Lighting
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the
exterior lighting temporarily:
Before leaving the vehicle, turn the
X
SmartKey to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the
X
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
Sett. Sett. menu.
function has been
page 114).
Sett. Sett. menu.
function is