Windshield Wipers; Rear Window Wiper - Mercedes-Benz 2013 GL X166 Operator's Manual

according to the intensity of the rain. In
the Å position, the rain sensor is more
sensitive than in the Ä position, causing
the windshield wipers to wipe more
frequently.
Switching the rear window wiper on/
off
Combination switch
è Rear window wiper switch
:
b To wipe with washer fluid
2
I To switch on intermittent wiping
3
0 To switch off intermittent wiping
4
ô To wipe with washer fluid
5
X
Turn the SmartKey to position 1 or 2 in the
ignition lock ( Y page 159).
X
Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
Replacing the wiper blades
Important safety notes
G
WARNING
For safety reasons, switch off the windshield
wipers and remove the SmartKey from the
ignition lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the on-board electronics are in state 0).
Otherwise, the wiper motor could be switched
on suddenly and cause injury.

Windshield wipers

! Never open the hood if a windshield wiper
arm has been folded away from the
windshield.
Never fold a windshield wiper arm without
a wiper blade back onto the windshield/
rear window.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the windshield wiper arm without a wiper
blade and it falls onto the windshield, the
windshield may be damaged by the force of
the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
! To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
Changing the windshield wiper blades
Removing the wiper blades
X
Remove the SmartKey from the ignition
lock.
X
Fold the wiper arm away from the
windshield.
X
Firmly press release knob : and pull the
wiper blade upwards from the wiper arm in
the direction of the arrow.
135
Z