Standard Features - Datamax w1110 User Manual

Standard Features

The thermal printer has the following standard features:
Table 1: Standard Features
Features
Max Print Speed
Resolution
Memory
Printer Type
Media Supply
Double-sided Top-of-Form
Sensor
Tear Bar
Media Back Feed
Control Panel
Reset Button
LEDs
Power Switch
Chassis / Media Cover
Bar Codes
Fonts
Downloadable Font Types
Graphics
Industry Standard Printer
Language
Interfaces
4 IPS / 102 mmps
300 dpi / 11.8 dpmm
32MB Flash (4MB User Space) / 32MB DDR2 RAM
Direct Thermal
• Roll-fed
• Die-cut
• Continuous Labels: (5" [127mm] roll max diameter on 1.0" and
1.5" [25.4mm and 38mm] core)
Fixed position for center-biased stock:
• Label Gap
• Reflective black mark on the bottom or the top of the form
Bar for tearing off gapped or continuous media
Capable of backing up; max 0.5"
Two buttons
Inset on the rear of the unit
Two LEDs: Green - Power On, Red - Error
Positioned on the rear of the unit
Plastic construction with a clear window
See Appendix A
See Appendix A
• True-Type Scalable
• PCL Bitmap (300 dpi)
Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file fomats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
• USB 2.0 Device
• LAN 10/100
7
Descriptions
Workstation Series User's Guide
Overview | 2