Configure The Avmd Settings [Video Analytics Setup] - Panasonic WJ-NT314 Network Operating Instructions

Configure the AVMD settings [Video analytics setup]

The settings relating to the detection area, depth, and schedule for AVMD can be configured on the "Video analytics
setup" page.
The "Video analytics setup" page has 2 tabs of the [AVMD] tab, and the [Schedule] tab.
Set the detection program [AVMD]
Click the [AVMD] tab on the "Video analytics setup" page.
Set the detection program for AVMD. It is possible to set up to 8 preset positions (CH1 to CH4) for 8 detection pro-
grams.
It is possible to set intruder detection area (3 types), object abandonment / removal detection area, and an area not
to activate AVMD.
When editing the detection program, perform the same procedure.
Important:
The detection program will not be applied to the AVMD function only with setting. To apply the setting, select the
detection program for "AVMD" of the [Alarm] tab on the "Alarm setup" page. ( page 40) However, up to 2 chan-
nels of CH1 to CH4 are available.
Step 1
Select the title of desired detection program from
"Detection program", and click the [DISPLAY] button.
→ Setup items will be displayed.
34
Note:
When the detection program has already been set,
the edited titles will be displayed on the pull-down
menu. It is possible to display and change the set-
tings by selecting a title and clicking the [DISPLAY]
button.
Step 2
Enter the title in "Detection program title".
Number of characters that can be entered: 1 - 20
characters
When "Detection program title" is blank, the default set-
ting will be applied.
Default setting: 1-8 Detection program
Step 3
Select the channel to activate the AVMD from "CH No.".
Available value: 1 - 4
Step 4
Enter the preset position number to activate the AVMD
in "Preset No.", and click the [GO] button.
Available value: (blank), 1 - 256
Step 5
Select the area to detect an intruder, object abandon-
mentt, or object removal.
q Click one of the icons from "1-(Blu)" to "Bla" of "Area
type".