Panasonic WJ-NT314 Network Operating Instructions page 51

[Default gateway]
When not using the DHCP function, enter the default
gateway of the unit.
Default setting: 192.168.0.1
<Unavailable IP addresses for the default gate-
way>
0.*.*.*
*.*.*.0
255.*.*.*
*.*.*.255
127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255)
Class E address (240.0.0.0 - 255.255.255.255)
* These IP addresses for the default gateway are
unavailable even when using the DHCP function.
Refer to the network administrator for the settings of
the DHCP server.
[HTTP port]
Assign the port numbers independently.
Available port number: 1 - 65535
Default setting: 80
[DNS]
Select "AUTO" or "MANUAL" to determine whether or
not to use the DNS.
When "MANUAL" is selected, it is necessary to config-
ure the settings for the DNS.
When using the DHCP function, it is possible to obtain
the DNS address automatically by selecting "AUTO".
Refer to the network administrator for further information
about the settings.
Default setting: MANUAL
[Primary DNS], [Secondary DNS]
When "MANUAL" is selected for "DNS", enter the IP
address of the DNS. Refer to the network administrator
about the IP address of the DNS.
Default setting: (blank)
[Line speed]
Select the line speed for data transmission from the fol-
lowings. It is recommended to use the default setting
"AUTO".
AUTO: Line speed will be applied automatically.
100M-FULL: 100 Mbps full-duplex
100M-HALF: 100 Mbps half-duplex
10M-FULL: 10 Mbps full-duplex
10M-HALF: 10 Mbps half-duplex
Default setting: AUTO
[FTP access]
Select "Allow" or "Forbid" to determine whether to allow
or forbid the FTP access.
Default setting: Forbid
51