Panasonic WJ-NT314 Network Operating Instructions page 21

Network interface unit

Hide thumbs Also See for WJ-NT314:

Table of Contents

[Alarm status update mode]

Select an interval to notify the unit status (alarm status,

audio status, etc.) from the following.

When the status of the unit changes, the alarm occur-

rence indication button, the mic input button, or the

audio output button will be displayed to notify of the unit

status.

Polling (30 sec): Updates the status each 30 seconds

and provide notification of the unit status.

Real time: Provide notification of the unit status when

the status has changed. (Except the alarm occur-

rence indication button)

Default setting: Real time

Note:

Depending on the network environment, notification

may not be provided in real time.

[Alarm status port]

When selecting "Real time" for "Alarm status update

mode", designate a port number to which the status

change notification is to be sent.

Available value: 1 - 65535

Default setting: 31004

Table of Contents